 |
 |
¶ What happens if the rear cover is not installed?
The rear cover at the connection point between the Snow Blower Module and the core must be properly installed.
If the rear cover is missing or not secured:
- Snow can enter the internal area during operation
- Snow may become compressed over time as the machine operates
- This can cause the electric actuator (linear actuator) to become stuck and stop moving
¶ Recommendation
- Always ensure the rear cover is installed correctly before operating the Snow Blower Module
- If snow intrusion occurs, stop operation and clean the affected area as soon as possible
- Continued operation with snow inside the mechanism may increase the risk of damage